lapara 1K - Page 12

11
LA
-
ON
-
RACK
-
V.09
(2U)
Display Function
Backup time information
Indicates the estimated backup time.
H: hours, M: minute, S: second
Configuration and fault information
Indicates the configuration items, and
the configuration items are
listed in details in section 3-5.
Indicates the warning and fault codes, and the codes are listed in
details in section 3-7 and 3-8..
Mute operation
Indicates that the UPS alarm is disabled.
Output & Battery voltage information
Indicates the output voltage and output frequency.
Vac: AC voltage, Vdc: DC voltage, Hz: frequency
Load information
Indicates the load level by 0-24%, 25-49%, 51-75%, and
75-100%.
Indicates overload.
Indicates the load or the UPS output is short circuit.
Programmable outlets information
Indicates that programmable management outlets are working.
Mode operation information
Indicates the UPS connects to the mains.
Indicates the battery is working.
Indicates the bypass circuit is working.
Indicates the ECO mode is enabled.
Indicates the Inverter circuit is working.
Indicates the output is working.
Battery information
Indicates the Battery level by
0
-
24%, 25
-
49%, 50
-
74%, and
75-100%.
Indicates the battery is fault.
Indicates low battery level and low battery voltage.
Input & Battery voltage information
Indicates the input voltage or frequency
and
battery voltage.
Vac: AC voltage, Vdc: DC voltage, Hz: frequency