lapara 1K - 6 Specifications

21
LA
-
ON
-
RACK
-
V.09
(2U)
6. Specifications
MODEL
LA-ON-1K-RACK-V.09 (L) LA-ON-2K-RACK-V.09 (L) LA-ON-3K-RACK-V.09 (L)
CAPACITY*
1000VA / 900W 2000VA / 1800W 3000VA / 2700W
INPUT
Voltage Range
110 - 300 VAC ± 5% or 55 - 150 VAC ± 5% @ 50% load
160 - 300 VAC ± 5% or 80 - 150 VAC ± 5% @ 100% load
Frequency Range 40Hz ~ 70Hz
Phase Single phase with ground
Power Factor ≧ 0.99 @ nominal voltage (100% load)
Harmonic distorsion (THDi) ≦ 5% @ nominal input voltage
OUTPUT
Output Voltage 200/208/220/230/240 VAC or 100*/110*/115*/120/127 VAC
AC Voltage Regulation (Batt. Mode)
± 1%
Frequency Range (Synchronized Range) 47~53Hz or 57~63Hz
Frequency Range (Batt. Mode)
50 Hz ± 0.1 Hz or 60Hz ± 0.1 Hz
Current Crest Ratio
3:1
Harmonic Distorsion ≦ ≦ 2%THD (Linear load); 4%THD (Non linear load)
Transfer
Time
AC Mode to Batt. Mode Zero
Inverter to Bypass 4 ms (Typical)
Waveform (Batt. Mode) Pure sinewave
EFFICIENCY
AC Mode 90% 91% 91%
Battery Mode 88% 88% 90%
ECO Mode 97% 97% 97%
BATTERY
Standard
model
Battery Type 12V / 9AH 12V / 7AH 12V / 9AH
Numbers 2 4 6
Typical Recharge Time 4 hours recover to 90% capacity
Charging Current (max.) 1.5 A**
Chaging Voltage 27.4 VDC ±1% 54.8 VDC ±1% 82,1 VDC ±1%
Long-run
model
Battery Type and
numbers
Depending on the capacity of external batteries
Charging Current (max.) 8.0 A
Chaging Voltage 27.4 VDC ±1% 54.8 VDC ±1% 82,1 VDC ±1%
CONNECTORS
Current outputs 4xIEC 6xIEC 8xIEC + 1xC19
Comunication ports 1xUSB + 1xRS232 + 1xInteligent Slot SNMP
PHYSICAL
Standard
model
Dimensions,
D x W x H (mm)
410x438x88 510x438x88 600x438x88
Net Weight (Kg) 11,6 19,5 27,4
Long-run
model
Dimensions,
D x W x H (mm)
410x438x88 410x438x88 510x438x88
Net Weight (Kg) 6,4 6,5 10,5
ENVIRONMENT
Humidity 20-90 % RH @ 0- 40°C (non-condensing)
Noise level Less than 50 dBA @ 1 meter
MANAGEMENT
Smart RS-232 & USB Supports Windows 2000/2003/XP/Vista/2008, 7/8, Linux, Unix and Mac
Optional SNMP Power management from SNMP manager and web browser
Note 1: L states for long-run model
* Derate capacity to 95% when the output voltage is adjusted to 115VAC. Derate capacity to 90% when the o
utput voltage is adjusted to 110VAC and
derate capacity to 80% when the output voltage is adjusted to 100VAC/200VAC/208VAC.
**If standard UPS is equipped with additional charger, the available setting options become 2A, 3A and 4A.
Product specifications are subject to change without further notice