To Next PageTo Next Page
Need help?Do you have a question about the Laser Reference ProShot L5 and is the answer not in the manual?
Outlines the warranty period and coverage for the L5 laser and R6 receiver.
Lists key technical data including range, accuracy, battery life, and operating conditions.
Addresses problems such as the laser not operating, incorrect readings, or rapid power loss.
Identifies included components and guides through the process of installing batteries.
Details the circular level vial, leveling knobs, on/off button, indicators, and calibration ports.
Step-by-step instructions for calibrating the laser's horizontal and vertical axes.
Guidance on checking laser setup against benchmarks and working close to the instrument.
Details the features and benefits of the R6 and R7 laser receivers.
Describes optional accessories like tripods, ceiling brackets, and rechargeable battery kits.
Instructions for checking calibration, battery maintenance, and cleaning output windows.
Essential safety guidelines for operating laser equipment, including warnings and OSHA requirements.
Explains uses for level alignment in construction and vertical alignment for layout tasks.
Describes the use of the laser's spot projection for 90-degree references and point transfer.
Detailed steps for setting up and aligning the laser in vertical mode for accurate work.
Guide to setting up the laser for horizontal level projection and checking benchmarks.
Utilizing vertical mode for alignment and the 90-degree beam for defining intersections.
Outlines the warranty period and coverage for the L5 laser and R6 receiver.
Lists key technical data including range, accuracy, battery life, and operating conditions.
Addresses problems such as the laser not operating, incorrect readings, or rapid power loss.
Identifies included components and guides through the process of installing batteries.
Details the circular level vial, leveling knobs, on/off button, indicators, and calibration ports.
Step-by-step instructions for calibrating the laser's horizontal and vertical axes.
Guidance on checking laser setup against benchmarks and working close to the instrument.
Details the features and benefits of the R6 and R7 laser receivers.
Describes optional accessories like tripods, ceiling brackets, and rechargeable battery kits.
Instructions for checking calibration, battery maintenance, and cleaning output windows.
Essential safety guidelines for operating laser equipment, including warnings and OSHA requirements.
Explains uses for level alignment in construction and vertical alignment for layout tasks.
Describes the use of the laser's spot projection for 90-degree references and point transfer.
Detailed steps for setting up and aligning the laser in vertical mode for accurate work.
Guide to setting up the laser for horizontal level projection and checking benchmarks.
Utilizing vertical mode for alignment and the 90-degree beam for defining intersections.
General| Accuracy | ±1/16 inch at 100 feet |
|---|---|
| Protection Class | IP54 |
| Self-Leveling Range | ±5 degrees |
| Rotation Speed | 600 RPM |
| Laser Class | Class II |
| Operating Temperature | 14°F to 122°F (-10°C to 50°C) |
| Laser Type | 635 nm visible red diode |
