RAISING THE MAST
1. The rig in transit position. The mast support is positioned at the granny
2.
. The mast and cradle are
ack of
ft
4. ould always
5. hould not
. The mast step bolt should then be
rails. This will be moved to the back of the boat when raising the mast.
The trailer should be chocked or lower the rear supports before
assembly of the mast.
3
moved aft. The mast
cradle should be
positioned at the b
the boat as shown, and
then the mast is moved a
to position the mast heel to
the step.
The mast sh
be positioned on the port
side of the keel.
The Lifting post s
ast be in position for lifting the m
as it could foul the rigging.
5
tightened so that the Nilock on the
nut is engaged.
To Next Page
Loading...
Need help?
General
