Need help?Do you have a question about the Laser Pico and is the answer not in the manual?
General| Type | Dinghy |
|---|---|
| Crew | 1-2 |
| Designer | Jo Richards |
| Length | 3.50 m |
| Hull weight | 60 kg |
| Sail area | 5.1 m² |
Check all components are present after unpacking the Pico sailboat.
Details of components included in the Pico Sport XD pack, including Vang, mainsheet boot, and blocks.
Ensure all hatches and the transom drain bung are securely screwed into the hull for watertight integrity.
Instructions for joining the mast sections and fitting the mainsail onto the mast.
Steps to safely raise the mast into the upright position on the boat.
Procedure for attaching the boom to the mast and setting up the clew outhaul.
How to attach and thread the kicking strap (vang) to control the mainsail boom.
Instructions for setting up the mainsheet system and traveller block on the boat.
Guide to installing padded toe straps and the sport mainsheet block/boot assembly.
Steps for attaching the rudder assembly to the transom and connecting the tiller extension.
How to thread the shock cord and secure the centreboard in its slot.
Instructions on how to reduce sail area in strong winds by rolling the sail around the mast.
Procedure for attaching the jib to the bow, hoisting it, and setting the jib sheets.
Guidance on temporarily stowing the mainsail and proper storage when not in use.
Instructions for correctly positioning sail numbers on standard Pico sails for racing.
Guidelines for applying sail numbers to Pico sport sails, ensuring correct placement for racing.
To Next Page
