Laser Pico User Manual

Pico rigging manual 2007.doc Page 14 of 28
7) Now take the sail and with the boat pointing into the wind, locate the clew hook
into the eyelet on the corner of the sail. Tension the clew out haul and secure in
the cleat on the boom.
1) Take the large kicker block with the snap hook and clip it to the plate on the
mast, just above the mast gate.
2) Take the small kicker block and fit it to the plate on the boom (near the front
end), using the small pin and ring.
4.7 Rigging the Kicker

Laser Pico Specifications

General

Type	Dinghy
Crew	1-2
Designer	Jo Richards
Length	3.50 m
Hull weight	60 kg
Sail area	5.1 m²