Laser Pico User Manual

Pico rigging manual 2007.doc Page 21 of 28
Fit the ruder assembly on the transom rudder fitting.
Warning: The split ring must be used secure the rudder assembly to prevent it
from falling off during a capsize. Also, the rudder retaining clip should be adjusted
so that the stock cannot be removed without depressing the clip by hand.
Slide the tiller extension universal joint into the housing on the end of the tiller.
Secure the captive over plate on top to the universal joint housing.
Sept 2007
Rudder
retaining clip
Split ring
Sept 2007
4.10 Fitting the rudder Assembly

Laser Pico Specifications

General

Type	Dinghy
Crew	1-2
Designer	Jo Richards
Length	3.50 m
Hull weight	60 kg
Sail area	5.1 m²