Need help?Do you have a question about the Laser VAGO and is the answer not in the manual?
Instructions for applying sail numbers to the standard Vago sail.
Instructions for applying sail numbers to the XD Race Vago sail.
Details on attaching spreaders, including pins, ends, and security measures.
Step-by-step guide for positioning the mast heel and attaching shrouds.
Instructions on how to unpack and attach the boom to the mast.
Steps for tying the Gnav control line from the boom to the mast base.
Instructions for preparing and attaching the jib sail.
Guide on hoisting the jib, tensioning the halyard, and attaching the jib sheet.
Instructions for temporarily tying and routing the gennaker halyard.
Steps for unfolding, attaching the tack, and securing the gennaker.
Guide for passing sheets through blocks, tying ends, and hoisting the gennaker.
Instructions for removing, checking battens, and preparing the mainsail.
Steps for locating the mainsail head and hoisting it using the main halyard.
Instructions for securing the tack strap and routing the outhaul line.
Guide for routing and tensioning the cunningham purchase system.
Instructions on rigging and controlling the single line reefing system.
Details on routing the reefing line and the step-by-step method for reefing.
Instructions for attaching the rudder assembly to the transom.
Essential safety checks and preparations before launching the boat.
Step-by-step guide on how to safely launch the boat into the water.
Guidelines on sailing rules, weather, and crew competence.
Specific safety warning regarding trapeze harness use during climbing.
To Next Page
General
