Laser Pico User Manual

Pico rigging manual 2007.doc Page 8 of 28
Check that the 3 hatches and transom drain bung are fully screwed into the hull. It
is advisable to apply a small amount of Vaseline or other non-staining lubricant to
the threads on a regular basis.
1) Insert the upper mast into the lower mast, making sure that the red arrows align.
4.3 Checking the hull
4.4 Rigging the Mast and sail

Laser Pico Specifications

General

Type	Dinghy
Crew	1-2
Designer	Jo Richards
Length	3.50 m
Hull weight	60 kg
Sail area	5.1 m²