Laser Pico User Manual

Pico rigging manual 2007.doc Page 25 of 28
1) Attach the hook for the jib to the tack of the jib with the rigging link and clip onto
the eye bolt on the bow.
2) Tie the jib halyard to the top of the jib with a bow line.
3) Hoist the jib and cleat the halyard securely in the cleat. Then stow the free end
of the halyard in the pocket on the tack of the mainsail.
1
2
34
4.13 Attaching the jib

Laser Pico Specifications

General

Type	Dinghy
Crew	1-2
Designer	Jo Richards
Length	3.50 m
Hull weight	60 kg
Sail area	5.1 m²