Laser Pico User Manual

Pico rigging manual 2007.doc Page 13 of 28
5) At the outer end take the long piece of shockcord, pass it through the eye of the
hook and tie a large knot or bowline.
6) At the other end pass through another small englefield clip and tie a figure of
eight knot in the end. Now clip the two clips together. This is the tidy up line for
your clew outhaul.

Laser Pico Specifications

General

Type	Dinghy
Crew	1-2
Designer	Jo Richards
Length	3.50 m
Hull weight	60 kg
Sail area	5.1 m²