MAINSAIL & MAINSHEET SET UP
1. The mainsheet is dead-ended
at the rear block on the boom
2. e
k on the traveller and
3.
o
om
. The Mainsail is a loose-footed sail
and is attached to the outboard end
5. over
f the boom.
ne, feeding the
hen
by tying a bowline thru the
block.
The sheet is then led thru th
aft bloc
back up to the boom block.
Back down to the forward
block on the traveller, back t
the forward block on the bo
and finally to the centre
jammer cleat base.
4
of the boom before the sail is
hoisted.
The webbing loop simply slides
the end o
6. The outhaul is then attached by
making a loop in the li
loop thru the eye in the sail and t
passing the bobble thru the loop.
To Next Page
Loading...
Need help?
General
