16
EN
Battery charging
– Use the power supply/charger unit
only in closed rooms; do not expose
to moisture or rain otherwise risk of
electric shock.
– Charge the device‘s battery
completely prior to use.
– Connect the power pack/charger
to the mains power supply and
socket (G). Please only use the
power pack/charger supplied. Using
any other power pack/charger will invalidate the warranty.
– The LED on the power pack/charger (H) lights red while the battery is
charging. When the LED changes to green, charging is complete. The LED
on the power pack/charger (I) flashes when the laser is not connected to
the power pack/charger.
– The battery can also be charged while using the device.
– The status indicator (4) flashes when the battery charge is low.
Insert batteries into
the remote control
– Observing the correct polarity.
Cubus G: Green laser technology
The DLD laser modules produce a high quality, green laser light.
Unlike previous generations they are more temperature stable
and energy efficient.
Furthermore, the human eye has a higher sensitivity to the wave
range of the green laser than the red laser, for example. This
makes the green laser diode appear much brighter than the
red one.
Green lasers, especially in the DLD design, thus offer advantages
with regards to how visible the laser line is under unfavourable
conditions.
To Next Page
Loading...
Need help?
General
