1.1 After-Sales Services
1.2 APP Software Download
1.3 PC Software Download
2.1 Disclaimer
2.2 Application
2.3 Safety
2.4 Safety Label
2.5 Switch Module
2.6 Fireware Upgrade
2.7 Warranty Terms
2.8 Copyright
2.9 Specifications
3.Product Accessories List
4. Get to Know LX1
5. LX1 Fast Assembly
6. Software Connection
7. Set Focal Length
8. Machine Maintenance
Dear LaserPecker user:
Thank you for purchasing LaserPecker LX1. This manual relates to your safety, legal responsibilities and
rights. Please read carefully and understand the manual before use. Failure to follow the instructions in the
manual may result in personal injury, low quality of engraving, or damage to the device and surrounding
objects. Please make sure the product operator understands and is familiar with the manual to maximize the
value of the product. Using this produce shall be deemed to have carefully read the full text of the product
manual, and to understand, acknowledge and accept all the terms and conditions of Disclaimer. Personal
injury, property or product damage caused by the user's improper operation or failure to operate according
to the product instructions shall be borne by the user, and Shenzhen Hingin Technology Co., Ltd. shall not be
held responsible.
When using LaserPecker product, you should:
Install, carry, store, operate, maintain and dispose of the product according to the manual and the provisions
of relevant laws and regulations and safety standards.
Ensure that the finished work do not breach the intellectual property rights of any third party or violate the
provisions of relevant laws and regulations.
Given the conditions and methods of use of this product are beyond LaserPecker's control, the
consequences of any of the following circumstances shall be borne by the user and LaserPecker shall
not be held responsible.
Personal injury, property or product damage caused by improper operation, failure to follow instruction
manual or other uncertainties.
The work user created by LaserPecker prodects infringes the intellectual property rights of the third party or
violate the relevant laws and regulations.
Personal injury, property or product damage arise during installation, carry, storage, usage, maintenance and
disposal of this product.
All official LaserPecker materials have undergone safety testing and are compatible with this product.
LaserPecker shall not be liable for material safety or engraving quality if use with non LaserPecker official
materials..
2.1Discl aimer
LX1 &LX1 Max laser engraver and cutter offers superior 4-in-1 performance, allowing various creation by laser
engraving, cutting and drawing.
2.2 Application
2.3 Safety
2.31 General Safety Information
02
·
·
·
·
·
·
·
·
·
·
·
·
·
·
The usage and specific application of this product, and emissions generated by engraving shall follow the
laws and regulations of the user's location.
Please use and maintain the product in accordance with the manual instructions to ensure safe operation.
This product is for indoor use only. Do not place in a rainy or damp environment.
Please prepare a stable and flat table or workbench for this product.
Minors of any age should not operate the product without adult supervision and assistance.
Please concentrate and pay close attention to operation process and changes in the surrounding environ-
ment during use.
Do NOT operate the product when fatigued or under the influence of drugs, alcohol, or medication.
When the product is in operation, please do NOT touch the moving part, otherwise it may spoil your
material.
To Next Page
Loading...