Lathem 2100HD - Program Settings; Enter Program Mode; Change Program Settings; Exit Program Mode

2100HD User’s Guide
7
◼ Program Settings
The 2100HD is preset at the factory to current US Eastern
Time and Date, and configured to print Day of Week and Time
in 1-12 AM/PM hours and regular minute format. You only
need to program the unit if you need to change these
settings.
Enter Program Mode
1. Press and release setting knob
Change Program Settings
1. Select menu item by rotating knob
2. Enter item change mode by pressing and releasing knob
3. Change item value by rotating knob to desired value
4. Save item value change by pressing and releasing knob
Exit Program Mode
1. Rotate setting knob to End Save Changes menu item
2. Press and release setting knob
Menu Item
Setting (Default in bold)
Set Time
HH:MM *US Eastern Time
Set Language
English, Spanish, French
Print Format (See table below for print
details)
1 *sample WE 2:15P
2 *sample WE 14:15
3 *sample 20-WE 14.25
4 *sample 20-JL 2:15P
5 *sample 20-JL 14:15
6 *sample 20-JL 14.25
More Choices
????
Set Month & Date
MM DD *Current Date
Set Year
YYYY * Current Year
Display Date
On, Off
Daylight Saving Time
On, Special, Off
Clock Display
12Hr, 24Hr
Enable Beep
On, Off
End Save Changes
End