Lathem 5000E User Manual

Lathem Time Corporation

Lathem 5000E Specifications

Power

power supply	110 VAC, 120 VAC, 230 VAC, 220-240 VAC
power consumption at 110/120 VAC	20 VA max while printing, 4 VA while idling, 0.2 A max while printing
power consumption at 220-240/230 VAC	20 VA max while printing, 4 VA while idling, 0.1 A max while printing

Operating Environment

operating temperature	-5˚C – 45˚C
operating humidity	20% – 80% RH (No condensation)
print capacity during power failure	200 prints or 72 hours

Weight and Dimensions

dimensions	174 mm (W) x 157 mm (D) x 208 mm (H)
weight	2.5 Kg
dimensions in inches	6 27/32" x 6 3/16" x 8 3/16"

Summary

QUICK EASY SETUP

Remove Top Case

Remove Protection Pad

Connect to Power Outlet

Insert Time Card

PROGRAMMING THE CLOCK

Control Keys Functions

Explanation of the functions of the five control keys (SW1-SW5).

SETTING THE TIME

Enter Time Setting Mode

Initiating the time setting process by pressing the MODE key.

Set Hour Value

Adjusting the hour value using the HOUR/MONTH key.

Set Minute Value

Adjusting the minute value using the MINUTE/DAY key.

Finalize Time Setting

Finalizing the time setting by pressing the SET key.

SETTING THE DATE

Enter Date Setting Mode

Initiating date setting by pressing the MODE key twice.

Set Year Value

Adjusting the year value using the YEAR key.

Set Month Value

Adjusting the month value using the HOUR/MONTH key.

Set Day Value

Adjusting the day value using the MINUTE/DAY key.

Finalize Date Setting

Finalizing date setting by pressing the SET key.

DAYLIGHT SAVING TIME SETTINGS

Setting the Starting Daylight Saving Time

Procedure to configure the start date for daylight saving time.

Setting the Ending Daylight Saving Time

Procedure to configure the end date for daylight saving time.

NUMBER SETTING OPERATIONS

Set Initial Number Sequence

Set Print Repeat Times

NUMBER RESET FUNCTION

COMMENT SETTINGS

PASSWORD MANAGEMENT

Register New Password

Steps to set a new password for accessing settings.

Access Settings with Password

Cancel Existing Password

PRINT METHOD CONFIGURATION

Print Alignment Configuration

Select Print Activation Mode

TECHNICAL SPECIFICATIONS

Main Function Details

Operational Specifications

DIP SWITCH SETTING CONFIGURATIONS

Year Format & Alignment DIP Settings

Print Mode & Minute Format DIP Settings

Hour Format & Leading Zero DIP Settings

Language & Password DIP Settings