Need help?Do you have a question about the Lauda RA 12 and is the answer not in the manual?
General| Pump capacity flow rate | 15 l/min |
|---|---|
| Bath volume | 12 l |
| Temperature stability | ±0.01 °C |
| Pump capacity | 15 l/min |
| Heating capacity | 2.0 kW |
General safety guidelines for operating the laboratory thermostat, covering intended use and personnel qualifications.
Specific safety precautions related to transport, handling, power connection, and operation of the thermostat.
Specifies the allowed operating conditions, including indoor use, altitude, temperature, humidity, and pollution degree.
Explains the Alpha thermostat naming convention and how type designations relate to heating or cooling functionality.
Details the bath types, materials, volumes, and clamping requirements for different Alpha models.
Describes the centrifugal immersion pump, its motor, and the function of the pump outflow reducer.
Outlines the high-quality materials used for parts exposed to heat transfer liquid.
Explains the LED display, control keys, temperature probe, and the logic of the control algorithm.
Details the components of the refrigeration system, including the compressor, condenser, and ventilation.
Lists standard accessories included with refrigerated RA types and optional accessories for heating types.
Instructions for placing the unit, attaching pump outflow reducers, and securing the control head.
Guides on filling the bath with heat transfer liquid to the correct level and how to empty the unit safely.
Details approved heat transfer liquids, their properties, and specifications for suitable hoses and their application.
Explains how to connect external circulation sets for using the thermostat as a circulation thermostat.
Instructions for connecting the unit to the correct grounded mains power socket and fuse protection.
Describes the process of switching on the unit, the self-test sequence, and initial display readings.
Explains the functions of the control keys (Enter, Decrement/Increment) and the meaning of pilot lamps.
Details how to set the desired bath temperature, including value acceptance and temperature limits.
Covers activation, deactivation, reading, and setting the automatic shutdown timer for the unit.
Explains how to set maximum (Hi) and minimum (Lo) temperature limits to prevent damage or improper operation.
Describes the configuration options for the refrigeration system (Auto, On, Off) for cooling thermostats.
Details how to adjust the offset for the internal temperature probe for accurate measurements.
Explains how to restore the unit's settings to factory defaults, excluding probe calibrations.
Describes the 'Standby' status and how to return to the standard operation menu.
Overview of alarms, warnings, and errors triggered by safety functions like overtemperature or low level.
Instructions for safely cleaning the unit using a moist cloth and mild detergent.
Outlines general maintenance procedures, service intervals, and parts requiring periodic checks.
Advises contacting LAUDA Service for repairs and proper packing of returned units.
Information on proper disposal of the device and its packaging according to EU directives.
Guidance on how to order spare parts and locate the instrument's rating label.
Provides general technical specifications, including ambient temperature, humidity, and power ratings.
Detailed technical specifications for the Alpha Immersion Thermostat model.
Technical specifications for Alpha Heating and Cooling Thermostat models (A and RA series).
Information on refrigerants, filling quantities, and CO2 equivalent for cooling thermostats.
Graphical representation of pump performance (pressure vs. flow rate) for immersion thermostats.
Graphical representation of cooling performance over time for specific RA models.
To Next Page
