Before operating the equipment please read carefully all the instructions and safety notes. If you
have any questions please phone us!
Follow the instructions on setting up, operation etc. This is the only way to avoid incorrect opera-
tion of the equipment and to ensure full warranty protection.
Transport the equipment with care!
Cooling thermostats may NEVER be overturned nor put upside down!
Equipment and its internal parts can be damaged:
by dropping,
by shock.
Equipment must be operated only by technically qualified personnel!
Never operate the equipment without a proper heat transfer liquid!
Never operate the equipment without sufficient water or heat transfer liquid level!
Do not start up the equipment, if:
it is damaged or leaking,
the supply cable is damaged.
Switch off the equipment and pull out the mains plug for:
servicing or repair,
before moving the equipment!
Drain the bath before moving the equipment!
Have the equipment serviced or repaired by properly qualified personnel only!
The device may only be used in the following areas:
Production, quality assurance, research and development in an industrial environment.
The Operating Instructions include additional safety notes which are identified by a triangle with an exclamation
mark. Carefully read the instructions and follow them accurately! Disregarding the instructions may have serious
consequences, such as damage to the equipment, damage to property or injury to personnel.
Product specifications are subject to change without notice!
To Next Page
Loading...
Need help?
General
