Lauda UC 2 - Page 50

50
Accessories for UC 8 to UC 24
Catalogue number
IK10: 2x10m Installation Kit: Includes 2 hoses and 2 sets of fittings
A000002
IK20: 2x20m Installation Kit: Includes 2 hoses and 2 sets of fittings
A000005
IK50: 2x50m Installation Kit: Includes 2 hoses and 2 sets of fittings
A000007
BSP-NPT Adapters: 2 fittings male-male to convert from the female BSP on the unit
to an NPT male thread to the customer application
A000036
EB: External by-pass: Required when the temperature difference between inlet and
outlet is higher than 10 °C to avoid possible damages of components
A000010
PRV: Pressure Reducing Valve: For adjustment of the maximum pressure with pressure
sensitive applications
A000034
SV: Water Solenoid Valve kit: To avoid fluid return from an application installed above
the chiller. Includes check valve and solenoid valve
A001444
25 metres cable for the External controller display: Longer cable that replaces the one
that comes with the chiller
A001558
50 metres cable for the External controller display: Longer cable that replaces the one
that comes with the chiller
A001559
IP54 External controller display: It replaces the one that comes with the chiller. It’s
suitable for outdoor installation
A001560
Accessories for UC 50 and UC 65
Catalogue number
IK10: 2x10m Installation Kit: Includes 2 hoses and 2 sets of fittings
A000003
IK20: 2x20m Installation Kit: Includes 2 hoses and 2 sets of fittings
A000006
IK50: 2x50m Installation Kit: Includes 2 hoses and 2 sets of fittings
A000008
BSP-NPT Adapters: 2 fittings male-male to convert from the female BSP on the unit
to an NPT male thread to the customer application
A000037
EB: External by-pass: Required when the temperature difference between inlet and
outlet is higher than 10 °C to avoid possible damages of components
A000011
PRV: Pressure Reducing Valve: For adjustment of the maximum pressure with pressure
sensitive applications
A000035
SV: Water Solenoid Valve kit: To avoid fluid return from an application installed above
the chiller. Includes check valve and solenoid valve
A000014
25 metres cable for the External controller display: Longer cable that replaces the one
that comes with the chiller
A001558
50 metres cable for the External controller display: Longer cable that replaces the one
that comes with the chiller
A001559
IP54 External controller display: It replaces the one that comes with the chiller. It’s
suitable for outdoor installation
A001560