Accessories for UC 80 and UC 100
BSP-NPT Adapters: 2 fittings male-male to convert from the female BSP on the unit to
an NPT male thread to the customer application
EB: External by-pass: Required when the temperature difference between inlet and outlet
is higher than 10 °C to avoid possible damages of components
SV: Water Solenoid Valve kit: To avoid fluid return from an application installed above the
chiller. Includes check valve and solenoid valve
25 metres cable for the External controller display: Longer cable that replaces the one
that comes with the chiller
50 metres cable for the External controller display: Longer cable that replaces the one
that comes with the chiller
IP54 External controller display: It replaces the one that comes with the chiller. It’s
suitable for outdoor installation
2L Refrifluid B: (1) Concentrated bactericide and anticorrosive additive
4L Refrifluid B: (1) Concentrated bactericide and anticorrosive additive
25L Refrifluid 1: (2) Water/ethylene glycol mixture including Refrifluid B
50L Refrifluid 1: (2) Water/ethylene glycol mixture including Refrifluid B
100L Refrifluid 1: (2) Water/ethylene glycol mixture including Refrifluid B
(1) Use 2 litres per each 100 litres of water tank volume
(2) Ready to use mixture with -7ºC (20ºF) freezing point. Do not dilute
Chiller model
Catalogue number
Filter Element:
Replacement for the water
filter
Service Kit: Includes water
filter element and
Refrifluid B for regular
change