10 Decommissioning
WARNING!
Touching live parts
Electric shock
Disconnect the device from the power supply before
starting any installation work.
Always observe safety measures against electrostatic dis-
charge.
Take the operating unit out of operation by disconnecting it from the con-
stant temperature equipment:
1. Disconnect the LiBus connecting cable from the constant tem-
perature equipment and wind it up properly.
2. Remove the operating unit from the place of use.
3. Protect the operating unit from impacts and humidity if you wish
to store it. The storage location must meet the ambient conditions
specified in the technical data.
4.
In the event of disposal, follow the instructions in Ä “Old device”
on page 47.
V1
Command Touch operating unit46 / 51
To Next Page
Loading...