Lauda V1R20 - Information about the Operating Unit

2.2 Information about the operating unit
 Always switch the constant temperature equipment o before con-
necting or removing the operating unit.
 Only use suitable cables of a sucient length to extend the cable.
 Always lay the cables professionally and in a trip-proof manner. Attach
any cables that have been laid and make sure that they cannot become
damaged during use.
 Check the state of the cables and socket before operating the device.
 Avoid contacting the display with sharp or sharp-edged objects.
 Clean any soiled parts immediately.
 Do not carry out any repairs on the cable or operating unit yourself.
Contact the LAUDA service if necessary; see Ä Chapter 1.6 “Contact
LAUDA” on page 7.
 When not in use, keep the operating unit in its packaging and store in
accordance with the specified ambient conditions.
V1
Command Touch operating unit 9 / 51