Need help?Do you have a question about the LAUMAS W100 and is the answer not in the manual?
Covers proper use, environmental conditions, and installation recommendations for safe operation.
Guidance on installing load cells correctly and protecting their cables from damage.
Performs a quick check of the load cell signal response in mV.
Detailed instructions for measuring load cell electrical properties using a multimeter.
Details on display, keypad, serial ports, and panel mounting.
Instructions for setting operational setpoints and relay switching criteria.
Guide to configuring various system-wide operational parameters.
Setting load cell rated values for initial instrument calibration.
Procedure to zero the instrument with a load already present.
Adjusting calibration for improved accuracy across the weight range using sample weights.
Applying a digital filter to stabilize the displayed weight reading.
Selecting the desired unit for weight display and printing.
Setting a factor to modify the displayed weight value or for unit conversion.
Setting up the type and range of the analog signal output.
Covers proper use, environmental conditions, and installation recommendations for safe operation.
Guidance on installing load cells correctly and protecting their cables from damage.
Performs a quick check of the load cell signal response in mV.
Detailed instructions for measuring load cell electrical properties using a multimeter.
Details on display, keypad, serial ports, and panel mounting.
Instructions for setting operational setpoints and relay switching criteria.
Guide to configuring various system-wide operational parameters.
Setting load cell rated values for initial instrument calibration.
Procedure to zero the instrument with a load already present.
Adjusting calibration for improved accuracy across the weight range using sample weights.
Applying a digital filter to stabilize the displayed weight reading.
Selecting the desired unit for weight display and printing.
Setting a factor to modify the displayed weight value or for unit conversion.
Setting up the type and range of the analog signal output.
General| Brand | LAUMAS |
|---|---|
| Model | W100 |
| Category | Accessories |
| Language | English |
To Next Page
