LAUNCH Tyre Changer (TWC-502RMB)
1
General Information
Usage
TWC-502RMB is used for demounting, mounting and
inflating tyres of small and medium vehicles.
Mount/demount help device and quick-inflating device
features simple operation and high reliability. In addition, it
can also be a great help in car repair garage and tyre
dealers.
Features
l The equipment can be used for different purposes of
demounting, mounting and inflating tyres.
l The steel mount/demount is cast from excellent alloy
material with special shape and durable performance.
The supplied plastic mount/demount head with the
equipment is made from special engineering plastic
that has enough intensity and not damage the tyre
and rim.
l The two clamping cylinder ensures accurate central
alignment, so that the wheels can be held tightly.
l Pneumatically controlled tilting system saves the
effort and time of the operation.
l Moving up and down of the hexagonal column and
locking of the horizontal arm is controlled by a button,
which save operation time and make operation safe.
l Human design of the mount/demount help greatly
reduces work-intension of the operator, making
tyre-mount and tyre-demount operations convenient
and easy.
l The quick-inflating device keeps tyre bead close to
the rim tightly, avoiding over-long time inflation or
difficult inflation when the gun inflator is used for the
empty tyre.
l The layout of the pedals gives convenience to the
operating personnel.
l The bead breaker shoe can be adjusted to match
tyres with different widths.
Specifications
Dimensions
Maximum height: 1765mm (69″)
Length: 1350mm (53″)
Width: 950mm (37″)
Weight
Net weight: 320kg
Electric specifications
Voltage to choose:
A C110V(±5%) 60Hz（±1Hz）
AC220V(±5%) 50Hz（±1Hz）
AC230V(±5%) 60Hz（±1Hz）
Power: 1.1Kw
Phase: Single
RPM of turntable: 8/min
Air supply
Working pressure: 8－10bar
Bead breaker force: 14075N
Noise
Working noise: <70dB(A)
Applicable Range
Max. wheel diameter: 1067mm(42″)
Max. rim width: 420mm(17″)
Rim clamping diameter(outer): 10″－20″
Rim clamping diameter(inner): 13″－23″
Working conditions
Working temperature: -40℃－45℃
Transport/store temperature: -40℃－55℃
Humidity: 30－95%
Altitude: less than 1000m
To Next Page
Loading...