Launch CRT5011E

LAUNCH
35
Figure 5-17
After the sensor is successfully programmed, the following screen will appear.
Figure 5-18
Press the
button to return to the previous screen. Press the OK button to
continue programming other sensors.
Notes:
1. If a random ID is entered, please perform the TPMS Relearn function after
programming is finished. If the original ID is entered, there is no need to
perform Relearn funcon.
2. If a vehicle does not support relearn funcon, please select the Manual Input
opon to enter the original sensor ID manually, or trigger the original sensor at
the acvaon screen to get its informaon, before programming the LAUNCH-
sensor.