NOTES
: This equipment needs NFB (non-fuse
breaker) upon installation. This equipment does not
include this part, bought and installed by users.The
NFB is 16A.
1. UP button 2. Unlock button 3.DOWN button
4. ES button 5. Socket of light 6. Power switch
Electrical operation description:
After the electric wire is properly connected, switch on the
power switch.
During the lifting, after pressing the UP button, the oil
pump works, and the carriage rises. Release the UP
button to stop the rising. Press the DOWN button in short
time, and the carriage is locked.
To lower the carriage, first press the UP button to raise
the carriage a little, then press the DOWN button and the
UNLOCK button simultaneously, and the carriage will
lower.
If any button is found to have no response, check the
circuit breaker ]to see if opened.
To Next Page
Loading...