Diagram of hydraulic line of clear-floor 2-post lift
Fig. 8
Wearing Parts
No. Name Model Spec Qty Remark
1 O rubber sealing ring GB3452.1-92 48.7×5.3 1
2 Dust proof ring J40 1
3 Shaft sealing ring USI53×63×6 1
4 Rubber pad 4 Self-made part
7 Storage and Scrap
7.1 Storage
When the equipment requires long-time storage:
Disconnect the power supply
Lubricate all the parts requiring lubrication: mobile contact
surface of the carriage, etc.
Empty all the oil/liquid storage units
Put the plastic cover over the equipment for dust
protection
7.2 Scrap
When the equipment service life is expired and can no longer
be used, disconnect the power supply, and properly dispose of
as per relevant local regulations.
To Next Page
Loading...