INSTRUCTIONS MANUAL
-27-
Select OPTION. The following screen will be displayed:
Call the technical service for the code. Type in the code and press ENTER:
Press key 1 to enable tracer injection or 0 to disenable and press START to continue. After
enabling the tracer, recalibrate the oil scale.
COUNTERS
Switch the machine on. The MAIN MENU will appear after a few seconds:
Select NEXT MENU:
Select DATA AND CONFIGURAT.:
Select SERVICES:
This screen displays the total values for: recovered gas, service alarm counters, total vacuum
time (minutes), gas injected, gas recovered into the internal bottle using the function “bottle
refilling”.
Use ↓ to scroll the rows.
Press START to print all the values (+ actual date).
Gas rec. 0.0 kg
Service 0.0 kg
Vacuum 0 min
Gas fil. 0.0 kg
Fil. Bot. 0.0 kg
DATA
CONFIGURATION
SERVICES
PREVIOUS MENU
AUTOMATIC PROCEDURE
ASSISTED PROCEDURE
NEXT MENU
GAS AVAIL XXXX G
CALIBRATION
DATA AND CONFIGURAT.
SERVICE ALARM
BOTTLE FILLING
ENABLE TRACER
<Press 1 enabled>
Press 0 not enabled
Start to continue
........
To Next Page
Loading...