Need help?Do you have a question about the Launch Value-200 and is the answer not in the manual?
General| Brand | Launch |
|---|---|
| Model | Value-200 |
| Category | Air Conditioner |
| Language | English |
Machine is for R134a refrigerant recovery in vehicle A/C systems, requiring qualified personnel.
Machine recovers, recycles refrigerant, and purges A/C systems of impurities.
Machine is assembled; connect hoses per diagrams, ensuring correct pressure side connections.
Explains the function of primary control keys: STOP, RESET, ENTER, navigation, and START.
Initial checks before operation: main switch off, taps closed, and power connection.
Allows performing individual A/C service operations, except recovery/recycling.
Connect hoses correctly (BLUE to low, RED to high) and start the recovery/recycling phase.
Connect hoses, initiate vacuum, and perform leak testing after 10 minutes of operation.
Reintegrates new oil into the system after vacuum and before charging the A/C.
Selects manual or database-assisted methods to charge the A/C system with refrigerant.
Procedures for topping up and changing the vacuum pump oil.
Replaces dryer filters when indicated by service alarm or humidity gauge.
Performs calibration when LCD values are incorrect, requiring careful attention.
Calibrates the bottle scale using a reference weight and specific menu navigation.
Calibrates the oil scale by setting zero level and reference weight.
To Next Page