Launch X-431 PRO GT - Page 43

LAUNCH X-431 PRO GT User Manual
36
•
Value
: Switches the current graph display mode to Value display mode.
•
Report
: To save the current data in text format. All reports are saved under
the tab “Diagnostic Report” in “My Report” from “User Info” menu.
•
Record
: Tap to start recording diagnostic data for future playback and
analysis. The file is stored in “My Report” under “User Info” menu.
Report
: To save the current data in text format. All reports are saved under the
tab “Diagnostic Report” in “My Report” from “User Info” menu. For details on
report operations, please refer to Chapter 9.1 “My Report”.
Record
: Tap to start recording diagnostic data for future playback and analysis.
The saved file follows the naming rule: It begins with vehicle type, and then the
record starting time and ends with .x431 (To differentiate between files, please
configure the accurate system time). The file is stored in “My Report” under
“User Info” menu.
Fig. 5-26
Help
: Tap to view the help information.
E. Actuation Test
This option is used to access vehicle-specific subsystem and component tests.
Available test vary by vehicle manufacturer, year, and model.
During the actuation test, the tablet outputs commands to the ECU in order to
drive the actuators, and then determines the integrity of the system or parts by
reading the ECU data, or by monitoring the operation of the actuators, such as
switching a injector between two operating states.