EN
BEVERAGE PREPARATION
2
Pull the lever outward. The capsule insertion
space opens automatically.
3
Place the capsule in the machine.
Never put fingers or objects in the capsule
insertion space.
Only single-dose Lavazza Espresso
Point capsules should be inserted in
the capsule insertion space.
Insert one capsule at a time
4
Close the lever loading cap and wait until the
Select Beverage message appears on the
display.
5
Press the button for the espresso.
6
Wait for the display message to appear
Drink Ready/Thank you.
The coffee is ready.
SETTING THE BEVERAGE
PREPARATION
The nozzle height is adjustable to allow the inser-
tion of cups, mugs or glasses of different heights
Hold the far ends of the nozzle and move it
closer to the cup, mug or glass before dispens-
ing.
The machine has two trays for the use of cups,
mugs or glasses of different heights.
High tray
Low tray
DISPENSING BEVERAGE
At the press off a coffee button, of a soluble but-
ton that requires coffee or a hot beverage but-
ton without having first inserted the capsule,
no activity follows.
The display shows the message
ATTENTION! Insert capsule.
The dispensing of all beverages, with car-
tridge, only solubles, or mixed, can always
be interrupted by pressing the selected key
again.
CAFFÈ ESPRESSO
1
Insert the high cup tray, place the cup and
adjust the distribution nozzle fully extended
downward.
LONG ESPRESSO
1
Place the cup/glass cups on the tray and adjust
the distribution nozzle.
Perform steps 2, 3, 4 of the ESPRESSO para-
graph.
5
Press the button for the long espresso.
6
Wait for the display message to appear
Drink Ready/Thank you.
The coffee is ready.
MACCHIATO COFFEE
1
Place the cup/glasse on the tray and adjust the
nozzle.
Perform steps 2, 3, 4 of the ESPRESSO para-
graph.
5
Press the button for the macchiato coffee.
6
Wait for the display message to appear
Drink Ready/Thank you.
The coffee is ready.
LATTE MACCHIATO-FLAVORED DRINK/
CAPPUCCINO/MOKACCINO
1
Place the cup/glasse on the tray and adjust the
nozzle.
Perform steps 2, 3, 4 of the ESPRESSO para-
graph.
5
Press the button for the desired beverage.
6
Wait for the display message to appear
Drink Ready/Thank you.
The drink is ready.
CHOCOLATE/MILK-FLAVORED DRINKS
1
Place the cups/glasses on the tray and adjust
the nozzle.
2
Press the button for the chocolate/Milk-fla-
vored drinks.
3
Wait for the display message to appear Drink
Ready/Thank you
.
The selected beverage is ready.
HOT BEVERAGES WITH CAPSULE
1
Place the cups / glasses on the tray and adjust
the nozzle..
Perform steps 2, 3, 4 of the ESPRESSO para-
graph.
5
Press the button for hot drinks.
6
Wait for the display message to appear
Drink Ready/Thank you.
The selected drink is ready.
29
To Next Page
Loading...
