MAKING COFFEE
DISPENSING COFFEE
The machine will not supply the product until it
reaches the operating temperature.
The supply buttons blink alternately during the
heating cycle.
The machine will be ready for use when the lever
reaches the rest position and the supply buttons
come ON steadily.
1
Position the cup under the coffee spout.
2
Raise the capsule loader lever and place the
capsule in the capsule insertion space applying
light pressure.
Do not put fingers or other objects in the capsule
insertion space.
3
The machine features two pre-dosing buttons
and one free-dosing button.
Short-time dosing
Long-time dosing
Free dosing: when you have the amount of
coffee desired, press the coffee dispenser
button again to stop the flow.
If you wish to use different sizes of cups and con-
tainers, the drop collecting tray can be removed
using the pull handle.
4
Lower the capsule loading lever, then press one
of the coffee supply buttons.
STAND-BY
The machine will, after it has not been operated
for 30 minutes, enter the stand-by mode; more
over, the free dosing button will be blinking.
To start the machine again, either press one of the
supply buttons or open the capsule insertion lever.
EN
To Next Page
Loading...
