Lawn-Boy 10607 - Adjusting Upper Handle Height; Starting the Engine; Using the Self-Propel Drive

Figure9
1.Raisethemower2.Lowerthemower
Note:Thecuttingheightsettingsare1inch(25mm);
1-1/2inch(38mm);2inches(51mm);2-1/2inches
(64mm);3inches(76mm);3-1/2inches(89mm);and
4inches(102mm).
AdjustingtheUpperHandle
Height
Youmayraiseorlowertheupperhandletoaposition
comfortableforyou.
Note:Youcannotraisetheupperhandlehigherthan
theangleofthelowerhandle.
1.Loosentheupperhandleknob(Figure10).
Figure10
2.Movetheupperhandletothedesiredposition
(Figure11).
Figure11
3.Tightentheupperhandleknobastightasyoucan
(Figure12).
Figure12
StartingtheEngine
Holdthebladecontrolbaragainstthehandleandpull
therecoilstarter(Figure13).
Figure13
1.Bladecontrolbar
Note:Ifthemowerdoesnotstartafterseveralattempts,
contactanAuthorizedServiceDealer.
UsingtheSelf-propelDrive
Tooperatetheself-propeldrive,simplywalkwithyour
handsontheupperhandleandyourelbowsatyour
sides,andthemowerwillautomaticallykeeppacewith
you(Figure14).
Figure14
1.Nudgehere
Note:If,whenbackingupafterself-propelling,the
mowerdoesnotrollbackwardfreely,nudgethemower
forwardaboutaninchortwowithoutengagingthe
self-propeldrive(Figure14),thenpullthemower
backward.
8