3
SYMBOLS SAFETY
The rating plate on your machine
may show symbols. These represent
important information about the
product or instructions on its use.
Read these instructions
in full before using the
machine.
Danger! Keep clear of
moving parts!
Do not remove jammed logs
with your hands.
Dispose of the used oil in an
environment-friendly way.
Before starting any repair
maintenance or cleaning,
always disconnect the power.
Keep your work space tidy!
Untidiness may result in
accidents.
Do not remove or tamper
with any protection or
safety devices.
Wear safety footwear!
Wear protective gloves!
Wear eye protection!
Wear hearing protection!
Do not use in the rain.
Keep bystanders away from
the working area.
Avoid injury from the
movement of the splitting
blade.
Safety Warnings & Instructions
UNDERSTAND YOUR LOG SPLITTER
DRUGS, ALCOHOL AND MEDICATION
AVOID DANGEROUS CONDITIONS
Read and understand the owner's
manual and labels affixed to the log
splitter. Learn its application and
limitations as well as the specific
potential hazards peculiar to it.
Do not operate the log splitter while
under the influence of drugs, alcohol,
or any medication that could affect
your ability to use it properly.
Always operate your log splitter on dry,
solid, level ground. Never operate your
log splitter on slippery, wet, muddy, or
icy surfaces. The location you choose
should be free from any tall grass,
brush, or other interferences. There
should be plenty of room for handling,
and help the operator stay alert. Keep
your work area clean and well lighted.
Cluttered areas invites injuries. To
avoid tripping, do not leave tools, logs,
or other components laying around the
work area. Do not use the log splitter
in wet or damp areas or expose it to
rain. Do not use it in areas where fumes
from paint, solvents or flammable
liquids pose a potential hazard.
INSPECT YOUR LOG SPLITTER
Check your log splitter before turning
it on. Keep guards in place and
in working order. Form a habit of
checking to see that keys and adjusting
wrenches are removed from tool area
before turning it on. Replace damaged,
missing or failed parts before using
it. Make sure all nuts, bolts, screws,
hydraulic fittings, hose clamps, etc. are
securely tightened. Always check the
oil level in the hydraulic oil tank. Never
operate your log splitter when it is in
need of repair or is in poor mechanical
condition.
To Next Page
Loading...