12
A
DELIVERING
LOG SPLITTER TO
WORK SITE
The log splitter is equipped with 2
wheels for minor moving. To move the
log splitter to the work site. Grip the
handle (A) to tilt the log splitter slightly
after making sure the oil tank cover is
tightened.
TRANSPORT
1. Plan your work site. Work safely
and save effort by planning your
work before hand. Have your logs
positioned where they can be easily
reached. Have a site located to stack
the split wood or load it onto a nearby
truck or other carrier.
2. Prepare the logs for splitting. This
splitter accommodates logs up to
105cm in length. When cutting up
limbs and large sections, do not cut
sections any longer than 105cm.
If using a crane, lay hoist
sling at the lifting point (A).
For long distance transport,
fasten the log splitter at the
position with bundling sign
after lifting it into the truck,
to avoid free movement
during transportation.
Do not attempt to split
green logs. Dry, seasoned
logs split much more
easily, and will not jam as
frequently as green wood.
A
Before operation, fix the machine using
Bolts M10X30 on level ground.
SPLITTER OPERATION
To Next Page
Loading...