34
TROUBLESHOOTING
Mower vibrates
excessively and makes a
lot of noise.
The cutting blade is not
assembled securely.
Tighten the blade bolts.
The blade is not balanced.
Sharpen and balance the blade
following instructions in this manual (see
page 29). Or replace the blade.
The motor shaft is bent.
Stop the mower and remove the battery.
Have the mower inspected and repaired
by an authorized service center before
restarting.
Charger 2Hz red LED
light ashing.
Battery pack is too hot.
Allow the battery pack to reach normal
temperature. Charging will begin
when battery pack returns to normal
temperature.
For more status of the indicator lights on battery & charger, refer to page 21 & 22.
To Next Page
Loading...
