EasyManua.ls Logo

LawnMaster CLM2413A - Symbols and Signal Words

LawnMaster CLM2413A
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
SYMBOLS
SYMBOL NAME DESIGNATION/EXPLANATION
V
Volts Voltage
Direct Current Type or a characteristic of current
A
Amperes Current
Hz
Hertz Frequency (cycles per second)
W
Watts Power
hrs
Hours Time
Class II Construction Double-insulated construction
Safety Alert Precautions that involve your safety.
Read the Operator’s
Manual
To reduce the risk of injury, user must read and
understand Operator’s Manual before using this
product.
Do not mow up and
down slopes!
To avoid the risk of injury do not mow up and down
slopes. Always mow across slopes. (Angle ≤15°)
Keep all persons and
pets at a safe distance
from the mower while
operating!
To avoid the risk of injury to bystanders keep all
persons and pets at a safe distance from the mower
while operating.
Keep hands and feet
clear of mower deck
and discharge opening
at all times!
Rotating blades can cause serious injury.
Keep hands and feet clear of mower deck and
discharge opening at all times. Always be sure
blade has stopped after releasing switch lever and
removing battery before removing and replacing
collection bag, cleaning, servicing, transporting or
lifting the mower.
Stay behind the handle
when the motor is
running!
Objects struck by mower blade can cause serious
injury. Stay behind the handle when the moto is
running. Always ensure persons and pets are clear
of the discharge from the mower while operating.
Do not open or remove
safety shields
Do not open or remove safety shields while the motor
is running.
Look behind while
backing
Look behind while backing the mower in order to
avoid tripping.
Some of the following symbols may be used on this product. Please study them and
learn their meaning. Proper interpretation of these symbols will allow you to operate
the product better and safer.

Related product manuals