8
SAFETY INFORMATION
Do not use the machine for applications that are beyond its
capacity. Use the correct machine for your application. The
correct appliance will do the job better and more safely at
the rate for which it was designed.
Do not use the machine if the switch does not turn it ON
and OFF. Any tool that cannot be controlled with the switch
are dangerous and must be repaired.
Disconnect the plug from the power source before making
any adjustments, changing accessories, or storing tools.
Such preventive safety measures reduce the risk of starting
the trimmer accidentally.
Always maintain the grass trimmer in good working
order. Check for misalignment or binding of moving parts,
breakage of parts, or other conditions that would affect its
operation. If damaged, have the machine repaired before
use.
Keep cutting tools sharp and clean. Properly maintained
cutting attachments with sharp cutting edges are less likely
to bind and are easier to control.
Only use the tool, accessories, and attachments as
described in these instructions. Using the tool for
operations it is not intended for could cause damage to the
tool and hazardous situations. Always consider the working
conditions and the work to be performed.
We recommend that only parts and accessories made for
this machine by the manufacturer are used. Failure to do
so can result in personal injury.
When starting up and when the machine is in operation,
keep the cutting section away from all parts of the operators
body, especially the hands and feet.
To Next Page