16
Storage
cutting device with a soft, dry brush.
that the safety guard does not come into contact with other objects. This is because the safety
guard could become deformed, thereby changing its dimensions and its safety properties.
Spool Replacement (See Figs. 12&13)
NOTE:
replacement line for best performance.
MAINTENANCE
least a minute to verify the line and the tool are both operating correctly. Use only the spool and
line as recommended by the manufacturer.
CAUTION
Before replacing the spool line, make sure the trimmer is switched off and unplugged. The line
cutting blade, located on the safety guard is sharp. Take extra care and wear protective gloves.
WARNING
NOTE: Pay attention that the line end does not slip off the grooves of the spool. Ensure the line is
Replacement section.
in the corresponding recesses of the trimmer head. They lock in audibly.
To Next Page