17
MAINTENANCE
Line Replacement (See Figs. 14&15)
NOTE: Self-winding is not recommended. If the line is not wound properly it can cause the trimmer
feed system to malfunction. For this reason, users are strongly urged to purchase the pre-wound
spool.
Should you wish to wind the line yourself, the instructions are provided below:
inside upper section of the spool as shown, and the other is in the opposite lower section of the
criss-cross.
NOTE: Always clean the spool cover and trimmer head housing before reassembling the trimmer
head.
NOTE: Always clean the trimmer head before replacing the spool.
cover.
NOTE:
To Next Page