What does it mean if LawnMaster VBRM16-01 Lawn Mower battery indicator is red flashing?
A red flashing battery indicator on your LawnMaster Lawn Mower indicates: * Abnormal battery temperature: Allow the machine to cool down to a normal temperature, then restart the mower. * Electric core fault: Remove and re-insert the isolator key and restart the mower.
What to do if my LawnMaster Lawn Mower is stuck during mowing?
If your LawnMaster Lawn Mower gets stuck while mowing, there are several possible reasons and solutions: * Check the wheels and blade disc for grass or debris and remove any obstructions. * If the blade disc is in a pool of water, move the mower and prevent water from collecting in the area. * If the mower is caught on something, free it and remove the obstacle. * If it's stuck behind obstacles, remove them. * Level any uneven dips or hollows in the lawn with topsoil and grass seed. * If the lift sensor is activated, free the mower.
What to do if LawnMaster VBRM16-01 is cutting grass unevenly?
If your LawnMaster Lawn Mower is cutting grass unevenly, consider the following: * If the working area is too big, adjust the border protections to decrease it. Recharge the battery to mow the area twice or purchase an additional battery. * Check if blades are dull and replace all the blades and screws. * If the height of cut is too low, or the grass is too high, increase the height of cut. * Check underneath the mower for grass wrapped around the blade disc and clear as necessary.
Why my LawnMaster VBRM16-01 fails to start?
If your LawnMaster Lawn Mower fails to start, check the following: ensure the isolator key is correctly installed, verify that the battery is properly installed, and make sure the battery is fully charged.
What to do if the cutting blade is not rotating on my LawnMaster VBRM16-01?
If the cutting blade is not rotating while your LawnMaster Lawn Mower is switched on, it may be due to an obstruction. Remove the isolator key and the battery pack, then clear any obstructions. Also, check if the blade screw is loose and tighten it.
Why LawnMaster robotic lawnmower fails to start?
If your LawnMaster robotic lawnmower isn't starting, several factors could be at play. Make sure the isolator key is correctly installed. Also, ensure the battery is properly installed and fully charged. A possible clogging may also prevent the start. In this case, remove the isolator key and battery, then check underneath the mower, clearing any obstructions (always wear gardening gloves).
What to do if LawnMaster cutting blade is not rotating while the mower is switched on?
If the cutting blade of your LawnMaster mower isn't rotating when switched on, it may be obstructed. Remove the isolator key and battery pack, then clear any obstructions (always wear gardening gloves). Also, check if the blade screw is loose and tighten it.
What to do if LawnMaster Lawn Mower is vibrating?
If your LawnMaster Lawn Mower is vibrating, here are a few things to check: * Damaged cutting blades: Replace the blades. * Too many blades in one position: Ensure only one blade is fitted at each screw and that blades are not stuck. * Different blade versions used: Verify all blades are the same version (thickness). * Loose blade screw: Tighten the blade screws.
What to do if LawnMaster VBRM16-01 cutting blade is not rotating?
If the cutting blade of your LawnMaster Lawn Mower isn't rotating while switched on: * The cutting blade might be obstructed: Remove the isolator key and the battery pack, then clear any obstruction (always wear gardening gloves). * The blade screw might be loose: Tighten the blade screws.
What does it mean if LawnMaster Lawn Mower error indicator is yellow continuous?
A continuous yellow error indicator on your LawnMaster Lawn Mower suggests: * The lift sensor has been activated for 10 seconds: Remove and re-insert the isolator key, check for obstacles taller than 10 cm in the working area, and restart the mower. * The obstruction sensor has tripped 10 times in one minute: Remove and re-insert the isolator key, remove any obstacles, and check if the grass is too tall. If needed, mow the grass to below 60 mm with a conventional lawn mower, then restart the mower.
General| Power Source | Battery |
|---|---|
| Cutting Width | 16 inches |
| Wheel Size | 6 inches |
| Engine Type | Electric |
| Cutting Height Adjustment | 5 positions |
To Next Page
