22
OPERATION
Cutting Modes
Auto Cutting
In Auto cutting mode, the robotic mower will mow the lawn in a random pattern.
After the robotic mower is powered on, press the Auto Mow Button for 2 seconds. Then press
blades have started to spin.
The robotic lawnmower will automatically search for a suitable working area. If the robotic mower
direction. The blades will not spin until the mower can run for continuously for at least 5 seconds.
Spot Cutting
In spot cutting mode, the robotic mower will mow in a spiral outwards from where it is placed on
the lawn. This is best used to tidy up any areas that may not have been mowed during a random
mowing session.
After the robotic mower is powered on, press the Spot Cutting Button for 2 seconds. Then press
to mow in a random pattern automatically.
If the area to be mowed is too narrow for the robotic mower to carry out the spot cut, after
continuous searching, the mower will mow in a random pattern automatically.
NOTE: Spot cutting is also a great feature to use before random mowing to systematically and
Setting the Cutting Height (See Fig. 17)
cutting height can be lowered step by step every week until the desired cutting height has been
reached.
- Turn clockwise to raise the cutting height.
- Turn anti-clockwise to lower the cutting height.
away from the blade disc when adjusting its height.
WARNING
To Next Page
Loading...
