21
MAINTENANCE
General Maintenance
solvents when cleaning plastic parts. Most plastics are susceptible to damage from various
types of commercial solvents and may be damaged by their use. Use clean, dry cloths to
remove dirt, dust, oil, grease, etc.
with a dry cloth occasionally. Do not use water as this may damage any electrical components.
Storage
cutting device with a soft, dry brush.
that the safety guard does not come into contact with other objects. This is because the safety
guard could become deformed, thereby changing its dimensions and its safety properties.
Battery and Charger Maintenance
recessed cavity or on the contacts. Wipe with a dry cloth. Do not use solvents, water, or place in
wet conditions.
Always store away from metal objects which could create a connection with the terminals.
sunlight.
store the battery pack in direct sunlight.
Spool Replacement
NOTE:
replacement line for best performance.
To Next Page
Loading...
