EasyManua.ls Logo

LawnMaster VBRM16 - Switching On and Off; Cutting Device - Advancing the Trimming Line

LawnMaster VBRM16
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
OPERATION
To operate the appliance, wear suitable clothing, eye and ear protection.
Prior to every use, check that the appliance is operative. Do not block the on/off trigger or the
lock-off button. The switch and trigger must reliably turn off the motor when you release the switch.
Do not operate the appliance if one of the switches is damaged.
WARNING
NOTE:
body. Before turning on the appliance, check that it will not touch any objects.
After turning off the appliance, the trimmer head will continue to rotate for some time. Allow the
WARNING
Cutting Device - Advancing the Trimming Line
NOTE: A short or worn trimming line will not cut well. If you notice reduced cutting performance,
you should check if there is enough trimming line on the spool. Remove the battery pack
before inspection. For spool replacement, refer to the Spool Replacement instructions in the
Maintenance section.
This trimmer is equipped with an automatic single line mechanism. To release more line, start and
stop the trimmer 2 - 3 times.
battery charger will automatically switch to charging.
After continuous or repeated charging cycles without interruption, the charger may warm up. This
is normal and does not indicate a technical defect of the battery charger.

Other manuals for LawnMaster VBRM16

Related product manuals