LB-Link BL-M8723DU1 - 3.2 DC Power Consumption

3
802.11n: 64-QAM,16-QAM, QPSK, BPSK
B T:
8DPSK, π/4 DQPSK, GFSK
Working Mode
Infrastructure, Ad-Hoc
Wireless Data Rate
WIFI:
802.11b: 1, 2 ,5.5,11
802.11g: 6,9,12,18,24,36,48,54
802.11n: MCS0~7，HT20 reach up to72.2Mbps, HT40 reach up to150Mbps
BT:
1 Mbps for Basic Rate
2,3 Mbps for Enhanced Data Rate
Rx Sensitivity
WIFI:-94dBm (Min) BT: -89dBm (Min)
TX Power
WIFI:16.93dBm (Max) BT: 4.85dBm (Max)
Antenna Type Connect to the external antenna through the half hole
Dimension(L*W*H) (PCB) 12.2mm*12.9mm*0.8mm (L*W*H) ，Tolerance: ±0.15mm
Power Supply 3.3V±0.2V
Power Consumption Standby 80mA@3.3V (Max)
TX mode 330mA@3.3V (Max)
Clock Source 40MHz
Working Temperature -10°C to +50°C
Storage Temperature -40°C to +70°C
ESD CAUTION: Although this module is designed to be as robust as possible, Electrostatic Discharge (ESD)
can damage this module. It must be protected from ESD at all times and handled under the protection of ESD.
3.2 DC Power Consumption
Vcc=3.3V，Ta = 25 °C，unit: mA
Supply current Typ. Max
Standby (RF disabled) 75 80
802.11b 1Mbps 11Mbps
Supply current Typ. Max. Typ. Max.
TX mode
320
330 285 300
Rx mode
89
90 90 92
802.11g 6Mbps 54Mbps
Supply current Typ. Max. Typ. Max.
TX mode
260 270 190 205
Rx mode 89
90 92 95