7
4.2 Release blade. Use screw driver to hold flange and release nut, the blade can be took
off.
Warning!
Please make sure the cutting head has been assembled correctly before use!
Note: The packaging material is made of recycle materials. Dispose of packaging materials in
accordance with regulations.
5. Fit the belt. According to picture showing, fit the belt well.
OPERATION
When operating this machine, please follow the instructions for operations steps
Filling with fuel
Danger of injury!
Fuel is explosive!
DANGER! - Turn off and cool the motor down before filling the tank with fuel.
- You must observe all safety instructions relating to handing fuel.
To Next Page
Loading...
