Leckey BeMe - Page 102

p102 Leckey BeMe User Manual
SECTION 18.4:
ADJUSTING HIP WIDTH
ON CONTOURED SEAT
SECTION 18.5:
ADJUSTING HIP PAD
WIDTH ON BASIC AND
SPLIT SEAT BASIC
BACKREST
To adjust the hip width of the contoured
seat, the left and right hip pads
, can be
repositioned on the Velcro base
, where
the short, dashed lines
, aid positioning and
alignment. Align the back edge of the pads
with the back edge of the platework.
To adjust the hip pad width on the basic
backrest, release the snap fastener of the
backrest cushion to gain access to the
adjustment bolt
. Loosen the bolt and
adjust inward or outward to the desired
position. Tighten the bolt to secure in place.