p32 Leckey BeMe User Manual
3. Staining should be removed as quickly
as possible with absorbent cloth, towels
or a sponge. Routine soap and warm
water sponging are effective for ordinary
soiling and minor spills. Be careful not to
over wet the fabric as this will cause the
staining to spread.
4. Antiseptic cleaning agents can be used
on more stubborn stains. These may
require a safe solvent such as Isopropyl
Alcohol or Mineral Spirit.
5. The pelvic and trunk harnesses can be
machine washed at 60ºC. Make sure all
bolts and fasteners are removed first as
they may cause damage to your washing
machine. Store these in a safe place and
out of reach from children.
6. Always ensure the product is dry before
use.
Metal and plastic components
1. Soap and water or antibacterial spray can
be used for daily cleaning.
2. The chassis should be cleaned with a
damp cloth- do not use running water.
3. Do not use solvents to clean plastic or
metal components.
4. Make sure the product is dry before use.
SECTION 11:
DAILY PRODUCT
INSPECTION
(Therapists, Parents & Carers)
We recommend that daily visual checks of
the equipment are carried out by therapists,
carers or parents to ensure the product is safe
for use. The recommended daily checks are
detailed below.
1. Check that there is no lateral movement
or wobble in any of the moving parts.
Ensure all adjustment knobs and bolts are
in place and secure.
2. Check all upholstery and Velcro for signs
of wear and tear.
3. Check all castors are moving freely and
lock securely.
4. Ensure seat unit is securely fixed onto the
chassis. Also ensure the reclining back
locking levers are fully engaged.
5. Ensure the pelvic belt is fully secured
around the user and they cannot slide or
creep forward in the seat.
6. Ensure the footplate is attached securely.
If in any doubt to the continued safe use of
your Leckey product or if any parts should fail,
please cease using the product and contact
our Customer Care Team or your local dealer
as soon as possible.
To Next Page
Loading...
