Leckey BeMe - Cleaning and Care Information

Leckey BeMe User Manual p31
SECTION 9.27:
ATTACHING AND
DETACHING BACKREST
SECTION 10:
CLEANING AND CARE
INFORMATION
To attach the backrest, locate the backrest
receiver at the back of the seat base
.
Open up the receiver lock paddles
, at the
back of the seat base by pulling horizontally
outwards on the paddles and then rotating
upwards.
How to maintain:
When cleaning we recommend that you
use only warm water and a non-abrasive
detergent. Never use organic solvents or dry-
cleaning fluids.
Upholstery and fabrics
The cushion covers can be removed, machine
washed at 60ºC (low spin is recommended
where possible) and tumble dried at a low
temperature. Please note the stretch fabric
may show discolouration after multiple
washes at 60ºC, but this will not affect the
performance of the fabric. To prevent this, a
lower temperature can be used.
Please remove the foam from the following
covers before washing:
• Basic Backrest
• Seat Cushions
All other soft upholstery can be placed into
the washing machine intact, after removing
any fastenings.
1. The upholstery and fabrics can also be
cleaned by hand whilst in place. When
cleaning we recommend that you use
only warm water and a non-abrasive
detergent.
2. Innovative feature – our stretch fabric will
be impermeable to liquid for 30 minutes
after spillage to allow time for cleaning.
Place the base of the backrest
, into the
receiver, ensuring it is as deep into the
receiver as it can go. Rotate the paddles
downwards
, and push inwards
E
, to
secure the backrest in place.
Check that it is secure by pulling up on the
backrest and moving it forward and back.