Leckey BeMe - Re-Issuing Leckey Products

p34 Leckey BeMe User Manual
SECTION 13:
REISSUING LECKEY
PRODUCTS
(Therapists, Parents & Carers)
Most Leckey products are assessed and
ordered to meet the needs of an individual
user. Before reissuing a product, we
recommend that the therapist prescribing
the product has carried out an equipment
compatibility check for the new user and
has ensured that the product being re-
issued contains no modifications or special
attachments.
A detailed technical inspection should be
carried out on the product prior to re-issuing.
This should be carried out by a technically
competent person who has been trained in
the use and inspection of the product. Please
refer to section 12 for the required checks to
be carried out.
Ensure the product has been cleaned
thoroughly in accordance with section 10 of
this manual.
Note: Always clean the product first to
remove accumulated soiling prior to
disinfecting/sanitising
1. Where possible, we recommend the use
of an automated “fogger” disinfection
system that is used to completely cover
the product surfaces with a disinfectant
agent. The manufacturer’s instructions for
the chosen system should be referred to
prior to use and followed exactly.
2. Where an automated disinfection system
is not available, all product surfaces
should be wiped over with disinfectant
surface wipes or liquid disinfectant on
a soft cloth. Suitable products are 70%
IPA, 70% Alcohol or diluted bleach. The
manufacturer’s instructions for the chosen
product should be followed. Product
upholstery and fabrics should be cleaned
thoroughly in accordance with section,
Cleaning and Care Information, of this
manual.
Ensure a copy of the user manual is supplied
with the product. A copy can be requested
obtained from our website leckey.com.
Leckey recommend that a written record is
maintained of all product inspections carried
out during the reissue of the product.
If in any doubt to the continued safe use of
your Leckey product or if any parts should fail,
please cease using the product and contact
our Customer Care Team or your local dealer
as soon as possible.